On the Mac that doesn’t have the optical drive, open a new ‘Finder’ window. Double-check that both computers are on the same network. Once you’ve enabled DVD or CD Sharing on your Mac or Windows PC: Insert the disc into the optical drive. Select ‘Ask me before allowing others to use my DVD drive.’.I have certainly thought, on occasion, that it might have been convenient to have such a thing, but usually I am able to do all my work as long as I have the original system disks that came with the machine, and my DiskWarrior CD (a bootable disk) for hard disk problems. It feels like.In all my years of providing Mac troubleshooting services to Mac OS X users, I have never once had to use an external hard drive as a bootable device. It is very strange because the drive does not pull the disks in like it would normally. Hello, My gf has a new 21.5 inch iMac at 3.06GHz (iMac11,2 , July 2010) with 4GB RAM and after about a month of working properly, all of sudden we cannot insert disks in the DVD drive.I suspected that this should be possible, even if not fully supported by Apple. This was an interesting challenge and I figured I should explore the issue further, knowing that Mac OS X is designed for network installations, etc. Rename the file to remove the extension (use Get Info -> Name & Extension).10.6: Make DVD Player work with external DVD drives Authored by: Bill Lee on Jul 31, '12 06:43:37PM I can't boot from a system disc OSX 10.6.3 universal or tech tool pro 6 disc using DVD Drive switcher.Then in the past couple of weeks I have had two different requests for help with the installation of Mac OS X 10.4 on computers without a DVD drive. How can I watch a DVD with Front Row While the dvdmedia extension is recognized by DVD Player, it is not by Front Row. Also, make sure to update to latest version of Mac DVDRipper Pro. But it’s fairly rare.)The blank DVD disc you are using might be too small for the data you want to burn.
Dvd Player Not Working Mac That DoesnIn Apple’s view, Mac OS X 10.4 is now an old system for old machines, and we all know that Apple has more than a tendency to ignore the needs of people with older machines. But if you follow the link to the “ Mac OS X Upgrade” web site, it actually redirects you to the main Mac OS X page.The option might still be available somewhere, but Apple is obviously not putting much effort into making it available to their customers. It is still mentioned on this page. It’s only when they try to load a DVD such as the Mac OS X 10.4 install disk that they realize that it’s not working and they need me to explain to them that their machine is rather old and only has a CD drive, which cannot read DVDs.Now, when Mac OS X 10.4 first came out, Apple did provide an option to obtain a set of system installation CDs in replacement for the DVD installation disk. I was looking for a more convenient option.The other option that I found during my research is to use an iPod as the system installation disk. One is to boot from the system disk on a machine that has an internal DVD drive (such as a laptop) and then boot the target machine in Target Disk mode and plug it into the other machine as an external drive, using the external drive as the destination volume for the system installation.I didn’t try that, in part because my wife’s laptop was otherwise engaged at the time, and in part because this approach assumes that you always have a portable machine that can boot in Mac OS X 10.4 readily available. They both have FireWire connections, but I don’t have an external DVD drive, and I don’t know anyone who has one.Based on my research online, in such a situation there are two options. Mac sierra windows emulatorI imagine that if I had not used a FireWire iPod, I would have had to use an external FireWire drive.The first problem I encountered was when trying to erase the iPod’s hard drive in Disk Utility. The iPod I used is my wife’s old iPod mini, which is still working fine after all these years. In any case, the machines I am talking about here (the G4 and the eMac) are older machines without USB 2.0 connections, so a USB connection would be out of the question anyway. IPods made in the past three or three-and-a-half years no longer work with a FireWire connection (they all use USB), and I don’t know if they can be turned into bootable volumes. The tip did not provide all the required information and I had to make several attempts before succeeding, so I thought I would share the additional information here.First of all, I should note that I only tried this with a four-year-old FireWire iPod. ![]() I should also note that I didn’t use the “ Disk Image from Folder…” function as indicated by the man page for asr, but the “ Disk Image from XXX…,” where “ XXX” is the name of the Mac OS X 10.4 install DVD volume. I suspect, based on what the man page for asr says, that “ compressed” would have worked as well. Cdr” disk image) is even worse, as it creates a type of disk image that is not even recognized for the “ Restore” operation.Finally I created a “ read-only” disk image, and that worked. “Images->New->Image from ” is notAdmittedly, “ compressed” was the default option when I first tried to create my disk image, but I didn’t trust Disk Utility (and didn’t see the point of creating a compressed image for what was essentially just a temporarily used disk image stored somewhere on one of my hard drives), so I changed it to “ read/write.” The disk image creation process was fast enough, but when I then tried the next step (the “ Restore” operation below), it didn’t work.The “ CD/DVD master” option (which creates a “. Save the image as read-only or compressed. I had to try several times until I found, via the man page for the asr command, that you need to create a disk image of the type “ read-only” or “ compressed”:Use Disk Utility’s “Images -> New -> Image from Folder…” function and select the root of theVolume. They are required.Once that is done, you should be able to click on the “ Restore” button in Disk Utility’s “ Restore” tab. This command performs checks that are described in detail in the man page for asr. In the “ Restore” tab, you simple select the disk image that you’ve just created as the source, and then drag and drop the iPod as a volume onto the “ Destination” field.Before you can proceed, however, you still have one more thing to do, which is to run the “ Scan Image for Restore…” command in Disk Utility’s “ Image” menu. As far as I can tell, in spite of what the Disk Utility interface implies, this particular tab has nothing to do with which volume is currently selected in the list of volumes on the left-hand side. For this, you need to use the “ Restore” tab in Disk Utility. You can add music, notes, etc. I see no reason why it won’t work on the eMac as well.As far as I can tell, the iPod is still usable as an iPod, i.e. It’s not particularly faster than installing from the DVD, but it works just as well, and of course it works with a machine that has no DVD drive. The iPod itself is even called “ Mac OS X Install DVD.” And the iPod is ready to function as a bootable Mac OS X 10.4 install volume.I was able to use it to install Mac OS X 10.4 on my client’s old Power Mac G4 (450 MHz) yesterday. Of course using a drive that’s faster than an iPods may be even better for this. It turns a slow startup and install process into a rather quick procedure.
0 Comments
Leave a Reply. |
AuthorCrystal ArchivesCategories |